A kernel is a central component of an operating system. It acts as an interface between the user applications and the hardware. The sole aim of the kernel is to manage the communication between the software (user level applications) and the hardware (CPU, disk memory etc). The main tasks of the kernel are :
Earlier in this type of kernel architecture, all the basic system services like process and memory management, interrupt handling etc were packaged into a single module in kernel space. This type of architecture led to some serious drawbacks like 1) Size of kernel, which was huge. 2)Poor maintainability, which means bug fixing or addition of new features resulted in recompilation of the whole kernel which could consume hours
In a modern day approach to monolithic architecture, the kernel consists of different modules which can be dynamically loaded and un-loaded. This modular approach allows easy extension of OS's capabilities. With this approach, maintainability of kernel became very easy as only the concerned module needs to be loaded and unloaded every time there is a change or bug fix in a particular module. So, there is no need to bring down and recompile the whole kernel for a smallest bit of change. Also, stripping of kernel for various platforms (say for embedded devices etc) became very easy as we can easily unload the module that we do not want.
Linux follows the monolithic modular approach
Microkernels
This architecture majorly caters to the problem of ever growing size of kernel code which we could not control in the monolithic approach. This architecture allows some basic services like device driver management, protocol stack, file system etc to run in user space. This reduces the kernel code size and also increases the security and stability of OS as we have the bare minimum code running in kernel. So, if suppose a basic service like network service crashes due to buffer overflow, then only the networking service's memory would be corrupted, leaving the rest of the system still functional.
In this architecture, all the basic OS services which are made part of user space are made to run as servers which are used by other programs in the system through inter process communication (IPC). eg: we have servers for device drivers, network protocol stacks, file systems, graphics, etc. Microkernel servers are essentially daemon programs like any others, except that the kernel grants some of them privileges to interact with parts of physical memory that are otherwise off limits to most programs. This allows some servers, particularly device drivers, to interact directly with hardware. These servers are started at the system start-up.
So, what the bare minimum that microKernel architecture recommends in kernel space?
QNX follows the Microkernel approach.
- Process management
- Device management
- Memory management
- Interrupt handling
- I/O communication
- File system...etc...
Types Of Kernels
Kernels may be classified mainly in two categories
Monolithic
Micro Kernel
Earlier in this type of kernel architecture, all the basic system services like process and memory management, interrupt handling etc were packaged into a single module in kernel space. This type of architecture led to some serious drawbacks like 1) Size of kernel, which was huge. 2)Poor maintainability, which means bug fixing or addition of new features resulted in recompilation of the whole kernel which could consume hours
In a modern day approach to monolithic architecture, the kernel consists of different modules which can be dynamically loaded and un-loaded. This modular approach allows easy extension of OS's capabilities. With this approach, maintainability of kernel became very easy as only the concerned module needs to be loaded and unloaded every time there is a change or bug fix in a particular module. So, there is no need to bring down and recompile the whole kernel for a smallest bit of change. Also, stripping of kernel for various platforms (say for embedded devices etc) became very easy as we can easily unload the module that we do not want.
Linux follows the monolithic modular approach
Microkernels
This architecture majorly caters to the problem of ever growing size of kernel code which we could not control in the monolithic approach. This architecture allows some basic services like device driver management, protocol stack, file system etc to run in user space. This reduces the kernel code size and also increases the security and stability of OS as we have the bare minimum code running in kernel. So, if suppose a basic service like network service crashes due to buffer overflow, then only the networking service's memory would be corrupted, leaving the rest of the system still functional.
In this architecture, all the basic OS services which are made part of user space are made to run as servers which are used by other programs in the system through inter process communication (IPC). eg: we have servers for device drivers, network protocol stacks, file systems, graphics, etc. Microkernel servers are essentially daemon programs like any others, except that the kernel grants some of them privileges to interact with parts of physical memory that are otherwise off limits to most programs. This allows some servers, particularly device drivers, to interact directly with hardware. These servers are started at the system start-up.
So, what the bare minimum that microKernel architecture recommends in kernel space?
- Managing memory protection
- Process scheduling
- Inter Process communication (IPC)
QNX follows the Microkernel approach.
gr8 work bro keep blogging :) keep sharing
ReplyDelete